VERSION 1 # Currently, this should only be 1.
Supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
TRACKNAME AY3
Can be POLY, DRUM, MPE, or NULL
TYPE NULL
Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
Can be x (between 1-16), or NULL – this is ignored if output port is not MIDI
OUTCHAN NULL
Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
This defines the default ‘MAX RATE’ for automation lanes.
Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
DRUMLANES
Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
ROW must be between 1 and 8
TRIG can be between 0 and 127, or NULL
CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
NOTENUMBER can be between 0 and 127, or NULL
NAME supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
PC
Syntax: NUMBER NAME
number must be either:
- A number (for simple PC)
- Three numbers, delimited by ‘:’, which represent PC:MSB:LSB. You can put ‘NULL’ to not set the MSB/LSB.
PC must be between 1…128
MSB/LSB must be between 0…127
[PC]
[/PC]
CC
Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
2 Lfo_arp speed
3 Lfo_arp depth
6 Detune amount
7 Glide Amount
8 Sequencer Speed
9 Noise Frequ 1+2
10 Noise Freq 1
11 Noise Freq 2
12 Tune Voice1
13 Tune Voice2
14 Tune Voice3
15 Tune Voice4
16 Tune Voice5
17 Tune Voice6
18 Volume Voice1
19 Volume Voice2
20 Volume Voice3
21 Volume Voice4
22 Volume Voice5
23 Volume Voice6
24 + - Voice1
25 + - Voice2
26 + - Voice3
27 + - Voice4
28 + - Voice5
29 + - Voice6
30 + - Noise1
31 + - Noise2
32 + - Noise3
33 + - Noise4
34 + - Noise5
35 + - Noise6
36 + - lfo_arp 1
37 + - lfo_arp 2
38 + - lfo_arp 3
39 + - lfo_arp 4
40 + - lfo_arp 5
41 + - lfo_arp 6
42 + - env Voice1
43 + - env Voice2
44 + - env Voice3
45 + - env Voice4
46 + - env Voice5
47 + - env Voice6
48 + - seq Voice1
49 + - seq Voice2
50 + - seq Voice3
51 + - seq Voice4
52 + - seq Voice5
53 + - seq Voice6
54 LFO_ARP shape 0-7
55 Env shape Chip1 0-7
56 Env shape Chip2 0-7
[/CC]
NRPN
Syntax: “MSB:LSB:DEPTH NAME” or “MSB:LSB:DEPTH:DEFAULT=xx NAME”
Lsb & msb should be between 0 and 127
Note: LSB can be over 127 ONLY if MSB is 0 or omitted
e.g. ‘0:1026:7 FOO’, or ‘:2000:7 BAR’
the examples above would be equivalent to ‘8:2:7 FOO’ and ‘15:80:7 BAR’ respectively
DEPTH can be 7 or 14
For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
[/NRPN]
ASSIGN
Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
POT_NUMBER must be between 1 and 8
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, “NRPN”, or “NULL” (this won’t assign the pot).
Non explicitly-defined pots will be considered “NULL”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
DEFAULT VALUE
For CC: DEFAULT_VALUE must be a valid number between 0 and 127
For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. “-4.25V” or “1.7V”
Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
AUTOMATION
Syntax: TYPE:VALUE
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, or “NRPN”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
This section will be readable from Hapax.
[COMMENT]
[/COMMENT]