VERSION 1 # Currently, this should only be 1.
Supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
TRACKNAME TORSO S-4 MIX
Can be POLY, DRUM, MPE, or NULL
TYPE DRUM
Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
Can be x (between 1-16), or NULL – this is ignored if output port is not MIDI
OUTCHAN 16
Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN 16
This defines the default ‘MAX RATE’ for automation lanes.
Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
DRUMLANES
Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
ROW must be between 1 and 8
TRIG can be between 0 and 127, or NULL
CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
NOTENUMBER can be between 0 and 127, or NULL
NAME supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
1:TRIG:16:37 TRK1 REC
2:TRIG:16:38 TRK2 REC
3:TRIG:16:39 TRK3 REC
4:TRIG:16:40 TRK4 REC
5:TRIG:16:49 TRK1 OVERDUB
6:TRIG:16:50 TRK2 OVERDUB
7:TRIG:16:51 TRK3 OVERDUB
8:TRIG:16:52 TRK4 OVERDUB
[/DRUMLANES]
PC
Syntax: NUMBER NAME
number must be either:
- A number (for simple PC)
- Three numbers, delimited by ‘:’, which represent PC:MSB:LSB. You can put ‘NULL’ to not set the MSB/LSB.
PC must be between 1…128
MSB/LSB must be between 0…127
[PC]
[/PC]
CC
Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
47 MIX1 TRK1 LVL
48 MIX1 TRK2 LVL
49 MIX1 TRK3 LVL
50 MIX1 TRK4 LVL
51 MIX1 FLT1
52 MIX1 FLT2
53 MIX1 FLT3
54 MIX1 FLT4
55 MIX2 PAN1
56 MIX2 PAN2
57 MIX2 PAN3
58 MIX2 PAN4
59 MIX2 COMP
60 MIX2 PARAM2
61 MIX2 PARAM3
62 MIX2 MAIN LVL
14 MOD1 PARAM1
15 MOD1 PARAM2
16 MOD1 PARAM3
17 MOD1 PARAM4
18 MOD1 PARAM5
19 MOD1 PARAM6
20 MOD1 PARAM7
21 MOD1 PARAM8
22 MOD2 PARAM1
23 MOD2 PARAM2
24 MOD2 PARAM3
25 MOD2 PARAM4
26 MOD2 PARAM5
27 MOD2 PARAM6
28 MOD2 PARAM7
29 MOD2 PARAM8
30 MOD3 PARAM1
31 MOD3 PARAM2
32 MOD3 PARAM3
33 MOD3 PARAM4
34 MOD3 PARAM5
35 MOD3 PARAM6
36 MOD3 PARAM7
37 MOD3 PARAM8
38 MOD4 PARAM1
39 MOD4 PARAM2
40 MOD4 PARAM3
41 MOD4 PARAM4
42 MOD4 PARAM5
43 MOD4 PARAM6
44 MOD4 PARAM7
45 MOD4 PARAM8
[/CC]
[NRPN]
[/NRPN]
ASSIGN
Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
POT_NUMBER must be between 1 and 8
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, “NRPN”, or “NULL” (this won’t assign the pot).
Non explicitly-defined pots will be considered “NULL”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
DEFAULT VALUE
For CC: DEFAULT_VALUE must be a valid number between 0 and 127
For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. “-4.25V” or “1.7V”
Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
AUTOMATION
Syntax: TYPE:VALUE
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, or “NRPN”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
This section will be readable from Hapax.
[COMMENT] Torso S-4 MIX
[/COMMENT]```