VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME NTS-3
# Can be POLY, DRUM, MPE, or NULL
TYPE NULL
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
0 BANK SELECT MSB
32 BANK SELECT LSB
6 DATA ENTRY MSB
38 DATA ENTRY LSB
7 MASTER VOL MSB
39 MASTER VOL LSB
12 ALLFX X MSB
13 ALLFX Y MSB
14 ALLFX DPTH MSB
15 INPUT MUTE
16 FX1 X MSB
17 FX1 Y MSB
18 FX1 DPTH MSB
20 FX2 X MSB
21 FX2 Y MSB
22 FX2 DPTH MSB
24 FX3 X MSB
25 FX3 Y MSB
26 FX3 DPTH MSB
28 FX4 X MSB
29 FX4 Y MSB
30 FX4 DPTH MSB
44 ALLFX X LSB
45 ALLFX Y LSB
46 ALLFX DPTH LSB
48 FX1 X LSB
49 FX1 Y LSB
50 FX1 DPTH LSB
52 FX2 X LSB
53 FX2 Y LSB
54 FX2 DPTH LSB
56 FX3 X LSB
57 FX3 Y LSB
58 FX3 DPTH LSB
60 FX4 X LSB
61 FX4 Y LSB
62 FX4 DPTH LSB
80 FX1 SELECT
81 FX2 SELECT
82 FX3 SELECT
83 FX4 SELECT
98 NRPN LSB
99 NPRN MSB
102 ALLFX TOUCH
103 ALLFX FREEZE
104 FX1 TOUCH
105 FX1 FREEZE
106 FX1 ON_OFF
108 FX2 TOUCH
109 FX2 FREEZE
110 FX2 ON_OFF
112 FX3 TOUCH
113 FX3 FREEZE
114 FX3 ON_OFF
116 FX4 TOUCH
117 FX4 FREEZE
118 FX4 ON_OFF
[/CC]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# Note: LSB can be over 127 ONLY if MSB is 0 or omitted
# e.g. '0:1026:7 FOO', or ':2000:7 BAR'
# the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
0:32:14 BANK SELECT
6:38:14 DATA ENTRY
7:39:14 MASTER VOL
12:44:14 ALLFX X
13:45:14 ALLFX Y
14:46:14 ALLFX DPTH
16:48:14 FX1 X
17:48:14 FX1 Y
18:50:14 FX1 DPTH
20:52:14 FX2 X
21:53:14 FX2 Y
22:54:14 FX2 DPTH
24:56:14 FX3 X
25:57:14 FX3 Y
26:58:14 FX3 DPTH
28:60:14 FX4 X
29:61:14 FX4 Y
30:62:14 FX4 DPTH
98:99:14 NRPN
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]
Comments about your instrument definition goes here