I have an UDO Super 6 on the way so I put this together. Everything is pretty readable in the Hapax. I haven’t tested it out on the actual synth yet, but everything should be good to go. Keep an eye on the notes I put in the txt because a lot of these CC messages need certain values to do certain things.
VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME SUPER6
# Can be POLY, DRUM, MPE, or NULL
TYPE NULL
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
0 BANK SELECT
1 MOD LEVER
3 TEMPO
4 FOOT CTRL
5 PRTAMNTO TIME
6 DATA ENTRY MSB
7 VCA ENV LVL
11 EXPRESSION
12 DELAY TIME
13 DELAY FBK
14 SQNC LOAD
16 LFO1 WVFM MODE
# 0 = TRIANGLE 21 = SQUARE 43 = RANDOM 64 = SAW 85 = HF 107 = HF TRK
17 LFO1 RATE
18 LFO1 DELAY
19 LFO1 LR PHASE
20 LFO1 MODE
# 0 = FREE/NORM 43 = ONCE/DDS1 85 = RESET/DDS2
21 DDS LFO1 AMT
22 DDS ENV1 AMT
23 DDS MOD DEST
# 0 = DDS1 43 = BOTH 85 = DDS2
24 SUPER MODE
# 0 = OFF 43 = 1/2 85 = ON
25 PW/DETUNE
26 PWM/SWM
27 PWM/SWM SRC
# 0 = LFO1 43 = BOTH 85 = ENV1
28 CROSS MOD
29 DDS1 WVFM
# 0 = SINE 21 = SAW 43 = SQUARE 64 = TRIANGE 85 = NOISE 107 = ALTERNATE WAVEFORM
30 DDS1 RANGE
# 0 = 64' 21 = 32' 43 = 16' 64 = 8' 85 = 4' 107 = 2'
31 DDS2 WVFM
# 0 = SINE 21 = SAW 43 = SQUARE 64 = TRIANGE 85 = NOISE 107 = PULSE
32 ENV1 DCY HLD
33 ENV2 DCY HLD
34 DDS2 RANGE
# 0 = LFO 21 = 32' 43 = 16' 64 = 8' 85 = 4' 107 = 2'
35 DDS2 TUNE
36 DDS2 MODE
# 0 = NORM 43 = X-FADE/SUB OSC 85 = SYNC/AUDIO IN
37 OSCMIX SPLT PT
38 CTRL6 LSB
40 VCF HPF MODE
# 0 = OFF 43 = FIX 85 = TRK
41 VCF DRIVE
# 0 = OFF 43 = 1 85 = 2
43 VCF KEY TRK
# 0 = OFF 43 = 1/2 85 = ON
44 VCF ENV SOURCE
# 0 = ENV1 43 = 1/2 85 = ENV2
45 VCF ENV AMT
46 VCF LFO1 AMT
47 VCF DDS2 AMT
48 VCA DYNAMICS
# 0 = OFF 43 = 1/2 85 = ON
49 VCA ENV MODE
# 0 = ENV2 43 = FIXED ENV1 85 = FIXED ENV2
50 ENV1 MODE
# 0 = NORMAL 43 = INVERTED 85 = LOOP
51 ENV1 KEY TRK
# 0 = OFF 43 = 1/2 85 = ON
52 ENV 1 ATK HOLD
53 ENV1 ATK
54 ENV1 DECAY
55 ENV1 SUSTAIN
56 ENV1 RELEASE
57 ENV2 DECAY
58 ENV2 SUSTAIN
59 MANUAL MODE
60 LFO2 TRIG SRC
# 0 = TRIG 43 = AT + TRIG 85 = ON
61 PERF CTRL DEST
# 0 = DDS1 43 = 1+2 85 = DDS2
62 LFO2 RATE
63 LFO2 DELAY
64 SUSTAIN PEDAL
# 0 = OFF 64 = ON
67 OCT SELECT
70 DDS LFO2 AMT
71 VCF RES
72 ENV2 RELEASE
73 ENV2 ATTACK
74 VCF CTF FQ
75 VCF LFO2 AMT
76 DDS PB AMT
77 VCF PB AMT
78 VOICE ASG MODE
# 0 = POLY 2 26 = POLY 1 51 = UNISON 77 = LEGATO 102 = SOLO
79 UNISON SIZE
# 0 = 3 VOICES 26 = 6 VOICES 51 = 6 VOICES, OCTAVE 77 = 6 VOICES, OCTAVE & FIFTH 102 = 6 VOICES, MAJOR CHORD
80 BINAURAL MODE
# 0 = OFF 64 = ON
81 CLOCK SYNC
# 0 = OFF 64 = ON
82 ARP RANGE
# 0 = 1 OCTAVE 32 = 2 OCTAVES 64 = 3 OCTAVES 96 = 4 OCTAVES
83 ARP SWING
# 0 = SWING 0 26 = SWING 1 51 = SWING 2 77 = SWING 3 102 = SWING 4
84 ARP EXT CLOCK
# 0 = OFF 64 = ON
85 ARP MODE
# 0 = UP 26 = DOWN 51 = UP & DOWN 77 = RANDOM 102 = SEQUENCER
86 ARP ON/OFF
# 0 = OFF 64 = ON
87 ARP HOLD
# 0 = OFF 64 = ON
91 DELAY LVL
92 VCA LFO1 AMT
93 CHORUS
# 0 = OFF 32 = CHORUS1 64 = CHORUS2 96 = CHORUS 1 & 2
94 DRIFT
95 HPF FIX CTF FRQ
98 NRPN - LSB
99 NRPN - MSB
100 RPN - LSB
101 RPN - MSB
120 ALL SND OFF
121 RST ALL CTRLS
122 LOCAL CTRL
# 0 = OFF 64 = ON
123 ALL NOTES OFF
124 OMNI OFF
125 OMNI ON
126 MONO ON
127 POLY ON
[/CC]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# Note: LSB can be over 127 ONLY if MSB is 0 or omitted
# e.g. '0:1026:7 FOO', or ':2000:7 BAR'
# the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
Perkons
[/COMMENT]
