VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Subsequent25
# Can be POLY, DRUM, MPE, or NULL
TYPE POLY
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT A
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN 1
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD.WHL
2 FILTMOD AMT
3 LFORATE
4 MODPITCH AMT
5 GLIDRATE
7 MSTR.VOL
8 NOISELEV
9 VCO1WAVE
12 VCO2FREQ
13 OSC2BEAT FREQ
14 VCO2WAVE
15 VCO1LEVEL
16 VCO2LEVEL
17 SUBOSCLEVEL
18 MULTIDRIVE AMT
19 F.CUTOFF
20 WAVEMOD AMT
21 F.RESONANCE
22 F.EG AMT
23 F.ATTACK
24 F.DECAY
25 F.SUSTAIN
26 F.RELEASE
27 F.KB AMT
28 AMP.ATK
29 AMP.DECAY
30 AMP.SUSTAIN
31 AMP.RELEASE
65 GLIDE ENABLE
68 LEG.GLIDE
70 PMODOSC2
71 MODSOURCE
72 WAVMODDEST
73 GATEDGLIDE
74 VCO1OCTAVE
75 VCO2OCTAVE
76 LFORANGE
77 VCO2HARDSYNC
78 LFO.KB.AMT
79 FIL.KB.AMT
80 AMP.KB.AMT
81 VCOGATERESET
82 FILRESET
83 AMPRESET
85 GLIDETYPE
86 FILVELTIME
87 AMPVELTIME
88 RELONOFF
89 KB OCTAVE
90 FILGATE SOURCE
91 AMPGATE SOURCE
92 AMPVELO TO AMPLITUDE
93 LFO GATE RESET
94 DUO MODE
95 DUOMODPRIORITY
102 LFOMIDSYNC
103 F.DELAY
104 AMP.DELAY
105 F.HOLD
106 AMP.HOLD
107 BEND UP AMT
108 BEND DWN AMT
109 VCFPOLES
110 F.VELAMP
111 NOTEPRIO
112 FILEGREP
113 AMPEGREP
114 FILEGTRI
115 AMPEGTRI
116 EXAUDLEV
117 FILEGSPEED
118 AMPEGSPEED
119 KPTRANSPOSE
[/CC]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
[AUTOMATION]
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
Moog Subsequent25, Updated 220928 (based on Sub37 def file)
[/COMMENT]