VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME TR6s
# Can be POLY, DRUM, MPE, or NULL
TYPE DRUM
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
1:NULL:NULL:36 BD
2:NULL:NULL:38 SD
3:NULL:NULL:43 LT
4:NULL:NULL:39 HC
5:NULL:NULL:42 CH
6:NULL:NULL:46 OH
7:NULL:NULL:40 SD-alt
8:NULL:NULL:44 CH-alt
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
## These CCs work on project channel
2 BEAT
9 SHUFFLE
15 MASTER FX
16 DELAY LEVEL
17 DELAY TIME
18 DELAY FEEDBACK
19 MASTER FX CTRL
20 BD TUNE
23 BD DECAY
24 BD LEVEL
25 SD TUNE
28 SD DECAY
29 SD LEVEL
46 LT TUNE
47 LT DECAY
48 LT LEVEL
58 HC TUNE
59 HC DECAY
60 HC LEVEL
61 CH TUNE
62 CH DECAY
63 CH LEVEL
80 OH TUNE
81 OH DECAY
82 OH LEVEL
70 FILL IN TRIG
71 ACCENT
91 REVERB LEVEL
96 BD CTRL
97 SD CTRL
102 LT CTRL
106 HC CTRL
107 CH CTRL
108 OH CTRL
[/CC]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# Note: LSB can be over 127 ONLY if MSB is 0 or omitted
# e.g. '0:1026:7 FOO', or ':2000:7 BAR'
# the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
1 CC:23 DEFAULT=63 #bd decay
2 CC:28 DEFAULT=63 #sd decay
3 CC:47 DEFAULT=63 #lt decay
4 CC:59 DEFAULT=63 #hc decay
5 CC:62 DEFAULT=63 #ch decay
6 CC:81 DEFAULT=63 #oh decay
7 CC:17 #delay time
8 CC:18 #delay feedback
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
CC:46 #lt tune
CC:58 #hc tune
CC:23 #bd decay
CC:28 #sd decay
CC:47 #lt decay
CC:59 #hc decay
CC:62 #ch decay
CC:81 #oh decay
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
Roland TR6-s
[/COMMENT]
2 Likes