############# DRUM Example 1 #############
VERSION 1 # Currently, this should only be 1.
###### DEFINITIONS
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Nord RACK
# Can be POLY, DRUM, MPE, or NULL
TYPE POLY
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT B
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN 13
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NONE
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN ALL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
8:NULL:02:50 GHOSTSNARE
7:NULL:01:50 GHOSTKICK
6:NULL:11:68 LASER
5:NULL:11:67 TOM
4:NULL:11:66 RIDE
3:NULL:11:65 HIHAT
2:NULL:11:64 SNARE
1:NULL:11:63 KICK
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
1 INIT
1:1:NULL B01
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
5 PortaTime
7 Gain
8 OBalance
15 PoLM
16 Unison
17 OctShift
18 MwDestination
19 L1Rate
20 L1Wave
21 L1Destination
22 L1Amt
23 L2ArpRate
24 L2DestArpMode
25 Lfo2AmtArpRate
26 MosAttack
27 ModDecay
28 MDestination
29 ModAmt
30 O1Wave
31 O2Wave
33 OFineTune
34 O2KbdTrack
35 OSync
36 AmpDecay
37 AmpSustain
38 FltrAttack
39 FltrDecay
40 FltrSustain
41 FltrRelease
42 Resonance
43 FAmt
44 FMode
45 FVelocity
46 KbdTrack
65 PAuto
70 FmDepth
72 AmpRelease
73 AmpAttack
74 Cutoff
78 SemTones
79 OsPW
[/CC]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
1 CC:30 # 1 wave
2 CC:31 # 2 wave
3 CC:74 # cutoff
4 CC:73 # attack
5 CC:72 # release
6 CC:38 # filter attack
7 CC:39 # filter decay
8 CC:40 # filter sustain
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
[AUTOMATION]
CC:23 DEFAULT=20 #Dist Amount
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]