Instrument Definition: Norand mono

[rstn]

############# DRUM Example 1 #############
VERSION 1 # Currently, this should only be 1.

###### DEFINITIONS

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME NORAND

# Can be POLY, DRUM, MPE, or NULL
TYPE POLY

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT C

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN 1

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NONE

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN ALL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
8:NULL:02:50 GHOSTSNARE
7:NULL:01:50 GHOSTKICK
6:NULL:11:68 LASER
5:NULL:11:67 TOM
4:NULL:11:66 RIDE
3:NULL:11:65 HIHAT
2:NULL:11:64 SNARE
1:NULL:11:63 KICK
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
1 INIT
1:1:NULL B01
[/PC]

# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
7 Level
14 Reset modulator phase
15 Go to Step
43 Attack
44 Decay
45 Sustain
46 Release
47 Filter Env amount
48 OSC1 Freq
49 OSC1 detune
50 OSC1 wav
51 OSC1 vol
51 Fm amount
53 Sync
54 OSC2 Freq
55 OSC2 Detune
56 OSC2 Wav
57 OSC2 Volume
74 Cutoff
75 Res
76 Color
77 Follow filter
78 x-mod rate
79 x mod amount
80 X-env attack
81 X-env decay
82 X-env amount
83 X-env type
83 X-mod wav

[/CC]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
1 CC:43   #Attack
2 CC:44   #Decay
3 CC:45   #Sus
4 CC:46  #Release
5 CC:74  #cutoff
6 CC:75   #res
7 CC:76  #color
8 CC:50  #Osc1wav

[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
[AUTOMATION]
CC:43 DEFAULT=20  #Attack
CC:44 DEFAULT=20  #Decay
CC:45 DEFAULT=20  #Sus
CC:46 DEFAULT=20  #Release
CC:74 DEFAULT=20  #cutoff
CC:75 DEFAULT=20  #res
CC:76 DEFAULT=20  #color
CC:50 DEFAULT=20  #Osc1wav

[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]