hi everyone,
What’s your favorite text editor for copy pasting inst. def. codes? I tried with apple’s textedit, and when loading the file on the hapax i get: syntax error line 2
Thanks in advance!
Here is the code:
############# DIGITAKT2 #############
VERSION 1 # Currently, this should only be 1.
DEFINITIONS
Supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
TRACKNAME Digitakt2 FX
Can be POLY, DRUM, MPE, or NULL
TYPE POLY
Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
Can be x (between 1-16), or NULL – this is ignored if output port is not MIDI
OUTCHAN 15
Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
ALLACTIVE
Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
DRUMLANES
Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
ROW must be between 1 and 8
TRIG can be between 0 and 127, or NULL
CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
NOTENUMBER can be between 0 and 127, or NULL
NAME supports all alphanumeric ASCII, and ’ ', ‘_’, ‘-’, ‘+’ - can also be NULL
Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
PC
Syntax: NUMBER NAME
number must be either:
- A number (for simple PC)
- Three numbers, delimited by ‘:’, which represent PC:MSB:LSB. You can put ‘NULL’ to not set the MSB/LSB.
PC must be between 1…128
MSB/LSB must be between 0…127
[PC]
[/PC]
CC
Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
SEND FX PARAMETERS
21 Dly Time
22 Pingpong On/Off
23 Dly Wdth
24 Dly Feed
25 Dly Hipas
26 Dly Lopas
27 Dly RvbSnd
28 Dly Vol
29 Rvb Predly
30 Rvb Decay
31 Rvb Freq
89 Rvb Shelv
90 Rvb Hipass
91 Rvb Lopass
92 Rvb Vol
16 Chrs Depth
9 Chrs Speed
70 Chrs HiPass
71 Chrs Wdth
12 Chrs DlySnd
13 Chrs RvbSnd
14 Chrs Vol
MIXER PARAMETERS
111 Cmp Thshld
112 Cmp Attk
113 Cmp Release
114 Cmp Gain
119 Cmp Pttn Vol
115 Cmp Ratio
116 Cmp Sidechain
117 Cmp SideFlt
118 Cmp Mix
MISC PARAMETERS
110 Pttn Mute
19 Smpl Slot
24 Smpl Bank
17 Mst Ovrdrv
[/CC]
ASSIGN
Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
POT_NUMBER must be between 1 and 8
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, “NRPN”, or “NULL” (this won’t assign the pot).
Non explicitly-defined pots will be considered “NULL”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
DEFAULT VALUE
For CC: DEFAULT_VALUE must be a valid number between 0 and 127
For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. “-4.25V” or “1.7V”
Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
AUTOMATION
Syntax: TYPE:VALUE
TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, or “NRPN”
VALUE VALIDATION
For CC: Value must be a valid number between 0 and 119
For PB and AT, any text after the TYPE will be ignored
For CV, value must be between 1 and 4
For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
[AUTOMATION]
[/AUTOMATION]
This section will be readable from Hapax.
[COMMENT]
Digitakt2 FX
[/COMMENT]
