# VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME DIGITONE II FX
# Can be POLY, DRUM, MPE, or NULL
TYPE NULL
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL
# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
21 DELAY TIME
22 DELAY PINGPONG
23 DELAY STEREO WIDTH
24 DELAY FEEDBACK
25 DELAY HPASS FILTER
26 DELAY LPASS FILTER
27 DELAY REVERB SEND
28 DELAY MIX
29 REVERB PREDELAY
30 REVERB DECAY
31 REVERB SHELVING FREQ
89 REVERB SHELVING GAIN
90 REVERB HPASS FILTER
91 REVERB LPASS FILTER
92 REVERB MIX
16 CHORUS DEPTH
9 CHORUS SPEED
70 CHORUS HPASS FILTER
71 CHORUS WIDTH
12 CHORUS DELAY SEND
13 CHORUS REVERB SEND
14 CHORUS MIX
111 COMP THRESHOLD
112 COMP ATTACK
113 COMP RELEASE
114 COMP GAIN
119 COMP PTRN VOL
115 COMP RATIO
116 COMP SIDECHAIN SRC
117 COMP SIDECHAIN FLT
118 COMP MIX
82 MIXER DUAL MONO
72 INPUT L LVL
74 INPUT L PAN
73 INPUT R LVL
75 INPUT R PAN
78 INPUT L DELAY
79 INPUT R DELAY
80 INPUT L REVERB
81 INPUT R REVERB
76 INPUT L CHORUS
77 INPUT R CHORUS
72 INPUT LR LVL
74 INPUT LR BAL
78 INPUT LR DELAY
80 INPUT LR REVERB
76 INPUT LR CHORUS
[/CC]
# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]
[/CC_PAIR]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# Note: LSB can be over 127 ONLY if MSB is 0 or omitted
# e.g. '0:1026:7 FOO', or ':2000:7 BAR'
# the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
2:0:7 DELAY TIME
2:1:7 DELAY PINGPONG
2:2:7 DELAY STEREO WIDTH
2:3:7 DELAY FEEDBACK
2:4:7 DELAY HP FILTER
2:5:7 DELAY LP FILTER
2:6:7 DELAY REVERB SEND
2:7:7 DELAY MIX
2:8:7 REVERB PREDELAY
2:9:7 REVERB DECAY
2:10:7 REVERB SHELVING FREQ
2:11:7 REVERB SHELVING GAIN
2:12:7 REVERB HPASS FILTER
2:13:7 REVERB LPASS FILTER
2:15:7 REVERB MIX
2:41:7 CHORUS DEPTH
2:42:7 CHORUS SPEED
2:43:7 CHORUS HPASS FILTER
2:44:7 CHORUS WIDTH
2:45:7 CHORUS DELAY SEND
2:46:7 CHORUS REVERB SEND
2:47:7 CHORUS MIX
2:16:7 COMP THRESHOLD
2:17:7 COMP ATTACK
2:18:7 COMP RELEASE
2:19:7 COMP GAIN
2:24:7 COMP PTRN VOL
2:20:7 COMP RATIO
2:21:7 COMP SIDECHAIN SRC
2:22:7 COMP SIDECHAIN FLT
2:23:7 COMP MIX
2:40:7 MIXER DUAL MONO
2:30:7 INPUT L LVL
2:32:7 INPUT L PAN
2:31:7 INPUT R LVL
2:33:7 INPUT R PAN
2:36:7 INPUT L DELAY
2:37:7 INPUT R DELAY
2:38:7 INPUT L REVERB
2:39:7 INPUT R REVERB
2:34:7 INPUT L CHORUS
2:35:7 INPUT R CHORUS
2:30:7 INPUT LR LVL
2:32:7 INPUT LR BAL
2:36:7 INPUT LR DELAY
2:38:7 INPUT LR REVERB
2:34:7 INPUT LR CHORUS
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]
*Comments about your instrument definition goes here*
2 Likes