Definition Instrument

Hapax
1

Hello everyone

I copied the instrument definition elements of the Minilogue XD into my word to save it as a .txt file.

I then placed this file in the Hapax folder of the SD card.

My minilogue is well configured on my track 5.

When I apply an LFO on this track with a CC search I cannot find the elements of the definition file.

Did I miss a step? I saw that the font of the file must be UTF-8, I do not have this font on Word.

Thank you for your feedback, have a good evening

2

are you using mac or pc

3

For anything code or script related, it’s always better to use a simple editor. If you want something, that you already have, use the Editor on Windows or try TextEdit on Mac, depending on your system. If you’re up for installing something I’d recommend Notepad++ or Visual Studio Code. You’re going to have a much better time than trying to do this sort of thing with Word.

Edit: for this sort of questions it’s recommended to post the definition text, so we can actually see, what you did and give you more helpful advice

2 Likes
4

Bonjour, je suis sur Mac.
Voici le fichier que j’ai copié sur la carte

VERSION 1
TRACKNAME Minilogue XD
TYPE POLY
OUTPORT NULL
OUTCHAN NULL
INPORT ALLACTIVE
INCHAN NULL

PC

Syntax: NUMBER NAME

number must be either:

- A number (for simple PC)

- Three numbers, delimited by ‘:’, which represent PC:MSB:LSB. You can put ‘NULL’ to not set the MSB/LSB.

PC must be between 1…128

MSB/LSB must be between 0…127

[PC]
1:0:0 Patch 001
1:0:1 Patch 101
1:0:2 Patch 201
1:0:3 Patch 301
1:0:4 Patch 401
51:0:3 T BASIC SAW
52:0:3 T BASIC TRI
53:0:3 T BASIC SQR
54:0:3 T BASIC SIN
55:0:3 T LAYER OCT
56:0:3 T LAYER 5TH
57:0:3 T 3SAW POLY
58:0:3 T 4SAW DUO
59:0:3 T 8SAW MODO
60:0:3 T SYNC VCO2
61:0:3 T RING VCO2
62:0:3 T XMOD VCO2
63:0:3 T RESO VELO
64:0:3 T SHORT TOM
65:0:3 T SWEEPING
66:0:3 T EG+1SHOT
67:0:3 T PWM
68:0:3 T VPM MOD
69:0:3 T TRILL LFO
70:0:3 T PUMP SAW
71:0:3 T CHORD HIT
72:0:3 T RAND ARP
73:0:3 T REPEATER
74:0:3 T PINGPONG
75:0:3 T DOWNPOUR
76:0:3 T 100 WET
77:0:3 T DOUBLING
78:0:3 T PARROTED
79:0:3 T PUMP NOIS
80:0:3 T DOWNSAMPL
81:0:3 T THRU VCF
82:0:3 T 2 SINES
83:0:3 T REVERSED
84:0:3 T LONG SEQ
85:0:3 T STRINGS
86:0:3 T BRASS
87:0:3 T ORGAN
88:0:3 T WAH CLAV
89:0:3 T A EPIANO
90:0:3 T D EPIANO
91:0:3 T A BELL
92:0:3 T D BELL
93:0:3 T SUB BASS
94:0:3 T LOFI SINE
95:0:3 T MONO DRV
96:0:3 T ROAR VPM
97:0:3 T TALKIE
98:0:3 T KICK
99:0:3 T SNARE
100:0:3 T HATS
[/PC]

CC

Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME

DEFAULT_VALUE must be a valid number between 0 and 127

[CC]
1 Joystick+
2 Joystick-
7 Volume
5 Portamento
11 Expression
27 Voice-Depth
64 Sustain

50 VCO1 Wave
48 VCO1 Octave
34 VCO1 Pitch
36 VCO1 Shape
51 VCO2 Wave
49 VCO1 Octave
35 VCO1 Pitch
37 VCO1 Shape
80 OSC-Sync On/Off
81 Ring On/Off
41 XMod Depth

53 ME Type
103 ME Sub-Type
54 ME Shape
104 Shift Shape

39 MIX VCO1
40 MIX VCO2
33 MIX ME

43 VCF Cutoff
44 VCF Resonance
84 VCF Drive
85 VCF Keytrack

16 AMP Attack
17 AMP Decay
18 AMP Sustain
19 AMP Release

20 EG Attack
21 EG Decay
22 EG Intesity
23 EG Target

57 LFO Wave
58 LFO Mode
24 LFO Rate
26 LFO Intensity
56 LFO Target

88 MOD Type
96 MOD Sub-Type
28 MOD Time
29 MOD Depth
89 DLY Type
105 DLY Time
112 DLY Depth
107 DLY Dry/Wet
90 RVB Type
114 RVB Time
115 RVB Depth
110 RVB Dry/Wet
92 MOD On/Off
94 DLY On/Off
95 RVB On/Off
98 CV IN 1
99 CV IN 2
[/CC]

NRPN

Syntax: “MSB:LSB:DEPTH NAME” or “MSB:LSB:DEPTH:DEFAULT=xx NAME”

Lsb & msb should be between 0 and 127

DEPTH can be 7 or 14

For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)

[NRPN]
:16:7 Voice Mode Type
:17:7 MSEL Noise
:18:7 MSEL VPM
:19:7 MSEL USR
:20:14 MSHP Noise
:21:14 MSHP VPM
:22:14 MSHP USR
:23:14 MSHFT Noise
:24:14 MSHFT VPM
:25:14 MSHFT USR
:32:7 BEND RANGE+
:33:7 BEND RANGE-
:34:7 JSTK+ ASSGN
:35:14 JSTK+ RANGE
:36:7 JSTK- ASSGN
:37:14 JSTK- RANGE
:38:7 CV IN MODE
:39:7 CV1 ASSGN
:40:7 CV1 RANGE
:41:7 CV2 ASSGN
:42:7 CV2 RANGE
:48:7 MICRO TUNING
:49:7 SCALE KEY
:50:7 PRGM TUNING
:52:7 LFO KEY SYNC
:53:7 LFO VOICE SYNC
:54:7 LFO TARGET OSC
:56:7 EG VELOCITY
:57:7 AMP VELOCITY
:58:7 MULTI OCT
:59:7 MULTI ROUTE
:60:7 EG LEGATO
:61:7 PORTA MODE
:62:7 PORTA BPM SYNC
:63:7 PRGM LVL
:64:14 VPM PAR 1
:65:14 VPM PAR 2
:66:14 VPM PAR 3
:67:14 VPM PAR 4
:68:14 VPM PAR 5
:69:14 VPM PAR 6
:72:14 USR PAR 1
:73:14 USR PAR 2
:74:14 USR PAR 3
:75:14 USR PAR 4
:76:14 USR PAR 5
:77:14 USR PAR 6
:80:7 PRGM TRANSPOSE
:127:14 MASTER VOL
[/NRPN]

ASSIGN

Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE

POT_NUMBER must be between 1 and 8

TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, “NRPN”, or “NULL” (this won’t assign the pot).

Non explicitly-defined pots will be considered “NULL”

VALUE VALIDATION

For CC: Value must be a valid number between 0 and 119

For PB and AT, any text after the TYPE will be ignored

For CV, value must be between 1 and 4

For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14

DEFAULT VALUE

For CC: DEFAULT_VALUE must be a valid number between 0 and 127

For PB: DEFAULT_VALUE must be a valid number between 0 and 16383

For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)

For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. “-4.25V” or “1.7V”

Please note default value will be ignored for PB and AT messages.

[ASSIGN]
[/ASSIGN]

AUTOMATION

Syntax: TYPE:VALUE

TYPE can be “CC”, “PB” (pitchbend), “AT” (aftertouch), “CV”, or “NRPN”

VALUE VALIDATION

For CC: Value must be a valid number between 0 and 119

For PB and AT, any text after the TYPE will be ignored

For CV, value must be between 1 and 4

For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14

[AUTOMATION]
[/AUTOMATION]

[COMMENT]
Korg Minilogue XD
[/COMMENT]

5

I tried in a first time with text edit, i’m on mac, but not possible to save with .txt extend with this application.

That i don’t understand is there is something to do after copy the file on the sd card ?

thanks

6

That’s it, I found it.

I went to the textedit settings to validate the recording in .txt

And then above all, I went to the track to activate the instrument def file that I had not loaded.

Thanks for your feedback

2 Likes