# Rample hardware details and alternative firmware experiments?

**URL:** <https://squarp.community/t/rample-hardware-details-and-alternative-firmware-experiments/16635>\
**Category:** Rample\
**Created:** [November 17, 2026, 4:51pm UTC](https://squarp.community/t/rample-hardware-details-and-alternative-firmware-experiments/16635 "2026-11-17T16:51:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nutritionalzero](https://squarp.community/letter_avatar_proxy/v4/letter/n/df788c/32.png) [@nutritionalzero](https://squarp.community/u/nutritionalzero)\
**Post date:** [November 17, 2026, 4:51pm UTC](https://squarp.community/t/rample-hardware-details-and-alternative-firmware-experiments/16635/1 "2026-11-17T16:51:34Z")

</div>

Hi everyone! I’m exploring whether Rample could support custom firmware—particularly a four-voice synth using DSP from Mutable Instruments’ open-source Plaits, with one voice per output and the four CV/gate pairs controlling pitch and triggering.

I’ve done some initial analysis of an older firmware image, but there are still hardware details to  
confirm. Has anyone explored this already?

1. MCU: Does anyone know the exact STM32 part number and its flash/RAM capacity?
2. PCB photos: Are there clear photos of the inward-facing sides of both boards, or any schematics,  
pinouts, or teardown notes?
3. Debug access: Has anyone identified SWD pads or connected an ST-Link? Is read-out protection  
enabled?
4. Backup and recovery: Has anyone successfully backed up the complete flash, including the bootloader?  
Is there a documented recovery procedure if an experimental application won’t boot?
5. Firmware updates: Does the SD-card updater accept custom application images, or does it require a particular header, checksum, or signature? Has anyone documented the format?
6. DAC and outputs: What DAC does Rample use? Are all four individual outputs DC-coupled, and is the mix output summed in analog hardware?
7. CV inputs: Does anyone know the input circuitry, filtering, and practical resolution? Has anyone  
tested their accuracy and stability for 1 V/oct pitch control?
8. Hardware mapping: Has anyone mapped the MCU pins for the DAC, CV inputs, gates, controls, display, MIDI, and SD card?
9. Existing projects: Are there any custom firmware experiments, effect patches, or open-source drivers worth building on?
10. Squarp’s position: Has Squarp shared any guidance on community firmware, hardware documentation, or preserving the stock bootloader?

Any partial answers or pointers would be welcome. This is an exploratory project, not a finished port;  
I’m hoping to establish what’s feasible before flashing anything.
