VERSION 1 # Currently, this should only be 1.
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Nord Lead 2
# Can be POLY, DRUM, MPE, or NULL
TYPE POLY
# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL
# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL
# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL
# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN ALL
# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL
# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]
# PC
# Syntax: NUMBER NAME
# number must be either:
# - A number (for simple PC)
# - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
0 Sawbrass
1 VelocityStrings
2 ResonancePad
3 HardStringPad
4 ResonanceFadePad
5 PortamentoQuints
6 AFifthPad
7 PulsePadFM
8 WeatherBass
9 LeadSawSolo
10 SoftSawLead
11 Zyntar
12 ArpDown
13 FmMetallic
14 AttackBass
15 SawMono
16 Osc2Mod
17 Guitar1
18 Violin
19 SourceBass
20 PercLead
21 FmClavinet
22 SoftStrings
23 SHTechno
24 ResSweep
25 Phaser
26 BritePad
27 AnalogGrand
28 ElecPiano1
29 RandArp
30 Clarinet
31 Didjeridu
32 Sax
33 StringPad
34 SoloPulse
35 SpacePad
36 SampleHold
37 SawLegatoSolo
38 EchoSound
39 PulseSolo
40 SoftStrings2
41 Majesty
42 GlassBrass
43 Gimme5
44 FluteChoir
45 BrassComp
46 SyncSweep
47 SynthStrings
48 Trumpets
49 Duke
50 DirtyFm
51 SpaceClavinet
52 ResonantSaw
53 FmLead
54 TalkingClavinet
55 SawRing
56 Eraser
57 TakeTheFifth
58 EchoPad
59 Yeow
60 Syncher
61 LowBass
62 WaterBass
63 PickBass
64 FmMorphBass
65 Acid1
66 Acid2
67 LegatoBass
68 BlackHole
69 Sub
70 DB
71 WideBody
72 Fluff
73 SteelDrums
74 WurzPiano
75 MyClav
76 IBow
77 TackClav
78 SpanEyes
79 Floote
80 Hamplafon
81 Thumpinet
82 BellBar
83 Flageolettes
84 Rotator
85 Tuba
86 Trumpet
87 EnglishHorn
88 MetalFlute
89 Voice
90 FmHorn
91 Harpsichort
92 ElectricPiano2
93 Musing
94 Chang
95 Ravi
96 GuessI
97 Tubular
98 Waterhall
[/PC]
# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
7 Gain
17 OctShift
18 ModWheelDest
16 Unison
15 PolLegMon
65 PortAuto
5 PortTime
19 LFO1Rate
20 LFO1Wave
21 LFO1Dest
22 LFO1Amt
23 LFO2RateArpRate
24 LFO2DstArpMode
25 LFO2AmtArpRange
26 ModEnvAtk
27 ModEnvDcy
28 ModEnvDst
29 ModEnvAmt
30 Osc1Wave
31 Osc2Wave
78 Osc2Semi
33 Osc2Fine
70 OscFmDepth
34 Osc2KeyTrk
79 OscPulseWidth
35 OscSync
8 OscMix
73 AmpEnvAtk
36 AmpEnvDcy
37 AmpEnvSus
72 AmpEnvRel
38 FltEnvAtk
39 FltEnvDcy
40 FltEnvSus
41 FltEnvRel
44 FltMode
74 FltCut
42 FltRes
43 FltEnvAmt
45 FltVel
46 FltKeyTrk
80 FltDist
[/CC]
# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]
[/CC_PAIR]
# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
# Note: LSB can be over 127 ONLY if MSB is 0 or omitted
# e.g. '0:1026:7 FOO', or ':2000:7 BAR'
# the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
[/NRPN]
# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]
# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]
This is an program instrument definition for a Nord 2. The Nord 2 can hold 4 different programs on 4 different Midi channels. This definition focuses on the programs as separate instruments across the 4 midi channels. This is different than utilizing the Drum/Percussion or Performance/Organ mode of the Nord 2.
I personally have the rack version although there should be no difference in the midi implementation.