# Multitrack usb input help

**URL:** <https://squarp.community/t/multitrack-usb-input-help/7394>\
**Category:** Pyramid\
**Created:** [April 19, 2022, 11:33am UTC](https://squarp.community/t/multitrack-usb-input-help/7394 "2022-04-19T11:33:29Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joeyb](https://squarp.community/letter_avatar_proxy/v4/letter/j/e274bd/32.png) [@Joeyb](https://squarp.community/u/Joeyb)\
**Post date:** [April 19, 2022, 11:33am UTC](https://squarp.community/t/multitrack-usb-input-help/7394/1 "2022-04-19T11:33:30Z")

</div>

I just got the pyramid so forgive me if im missing something simple, i currently have the pyramid connected via usb to the iconnect audio4+ which is connected to the moog grandmother via usb and microkorg via the din port of the iconnect. My internal routing via the iconnect is correct as i am receiving midi to and from both devices via their dedicated channels. But what i want to do is use multitrack so that i can play each synth, have it record the midi, and send it back to the same device. For some reason when i change to the multitrack setting it doesnt record anything, yet if multitrack is off, it works as expected. Does multitrack only work with the physical midi ports? Or am i missing something?

---

<div class="post-metadata">

**Author:** ![thetechnobear](https://squarp.community/user_avatar/squarp.community/thetechnobear/32/230_2.png) [@thetechnobear](https://squarp.community/u/thetechnobear)\
**Post date:** [April 19, 2022, 12:07pm UTC](https://squarp.community/t/multitrack-usb-input-help/7394/2 "2022-04-19T12:07:19Z")

</div>

usb input has worked for me in the past and the track output is whatever the track is set to.

> **[Pyramid Manual | Squarp instruments](https://squarp.net/pyramid/manual/settings/)**
>
> Squarp Instruments dream up the hardware musical interfaces of tomorrow. Makers of Pyramid, Hermod & Rample.

omni mode= multitrack bank A

should be all you need.

also be very careful you are not creating duplicate midi message routes or some kind of feedback loop.  
so initially I would send ALL message via the pyramid, and not directly to the synths

---

<div class="post-metadata">

**Author:** ![Joeyb](https://squarp.community/letter_avatar_proxy/v4/letter/j/e274bd/32.png) [@Joeyb](https://squarp.community/u/Joeyb)\
**Post date:** [April 19, 2022, 12:31pm UTC](https://squarp.community/t/multitrack-usb-input-help/7394/3 "2022-04-19T12:31:52Z")

</div>

Thats what i figured and tried but for some reason wasnt able to get it to work. I will try again later and post a video if i cant figure if out. Thanks for the help!

---

<div class="post-metadata">

**Author:** ![system](https://squarp.community/user_avatar/squarp.community/system/32/2_2.png) [@system](https://squarp.community/u/system)\
**Post date:** [May 10, 2022, 12:31pm UTC](https://squarp.community/t/multitrack-usb-input-help/7394/4 "2022-05-10T12:31:55Z")

</div>

This topic was automatically closed 21 days after the last reply. New replies are no longer allowed.