# Hermod+ and Bluebox Eurorack on a 7U perf Intellijel case

**URL:** <https://squarp.community/t/hermod-and-bluebox-eurorack-on-a-7u-perf-intellijel-case/10172>\
**Category:** Hermod+\
**Created:** [October 5, 2023, 12:54pm UTC](https://squarp.community/t/hermod-and-bluebox-eurorack-on-a-7u-perf-intellijel-case/10172 "2023-10-05T12:54:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gianfranco](https://squarp.community/letter_avatar_proxy/v4/letter/g/4af34b/32.png) [@Gianfranco](https://squarp.community/u/Gianfranco)\
**Post date:** [October 5, 2023, 12:54pm UTC](https://squarp.community/t/hermod-and-bluebox-eurorack-on-a-7u-perf-intellijel-case/10172/1 "2023-10-05T12:54:01Z")

</div>

Hi,  
maybe it’s a silly question but anyway…  
I’m planning to use both Hermod+ and Bluebox Eurorack in the same Intellijel 7U Performance case.  
Unfortunately the case is rated at 1.500mA max at 5v and (according to modulargrid) both Hermod+ and Bluebox require 850 mA each at 5v for a total of 1.700mA.

Are these 850 mA effectively required by hermod+ ? Am I going to damage anything if I try to put them together in the case ?  
Is there any workaround ?

Thanks GF

---

<div class="post-metadata">

**Author:** ![greenman](https://squarp.community/letter_avatar_proxy/v4/letter/g/7cd45c/32.png) [@greenman](https://squarp.community/u/greenman)\
**Post date:** [December 6, 2023, 4:44pm UTC](https://squarp.community/t/hermod-and-bluebox-eurorack-on-a-7u-perf-intellijel-case/10172/2 "2023-12-06T16:44:38Z")

</div>

Unlike bluebox, Hermod+ allows to draw power solely from 12v if you switch the switch on the back as far as i know, so Hermod+ is no problem