# Drum lanes not triggering polyphonically

**URL:** <https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951>\
**Category:** Hapax\
**Created:** [February 27, 2024, 1:13pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951 "2024-02-27T13:13:30Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![focalsounds](https://squarp.community/letter_avatar_proxy/v4/letter/f/ecae2f/32.png) [@focalsounds](https://squarp.community/u/focalsounds)\
**Post date:** [February 27, 2024, 1:13pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/1 "2024-02-27T13:13:30Z")

</div>

Hi, I have a drum mode set up on a track that is triggering a sampler with some drum sounds.  
Each lane is sending its data out over the same midi channel. Though sending a different note per pad/lane. As this is how my sampler responds to incoming midi. This triggers everything fine when no other notes are being triggered. But let’s say there is a kick (ch6 - n34) and a hh (ch6 - n36) on the same step position but from a different lane. Only one gets triggered on the sampler.  
If I am in LIVE MODE - I can trigger both at the same time from the pads on the HAPAX.  
It’s just in STEP MODE that this is occurring.

I’ve tested the sampler with other sequencer methods and it works perfectly fine like this.

Is the DRUM LANE (MODE) on the HAPAX limited to monophonic triggering per midi channel?  
I would have assumed not but if that’s the case - that changes things drastically.

Any input or suggestions welcome. I’m assuming this is big user error and I’ll be kicking myself when it’s solved.

Many thanks

---

<div class="post-metadata">

**Author:** ![focalsounds](https://squarp.community/letter_avatar_proxy/v4/letter/f/ecae2f/32.png) [@focalsounds](https://squarp.community/u/focalsounds)\
**Post date:** [February 27, 2024, 1:29pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/2 "2024-02-27T13:29:31Z")

</div>

[UPDATE]

So even when I change each Drum Lane/Pad channels to individual MIDI Channels. The behaviour remains the same. So this tells me it’s not a polyphonic issue - but user error.

I can’t seem to find anything about this in the manual or the forums.

Thanks in advance for any help.  
Cheers

---

<div class="post-metadata">

**Author:** ![focalsounds](https://squarp.community/letter_avatar_proxy/v4/letter/f/ecae2f/32.png) [@focalsounds](https://squarp.community/u/focalsounds)\
**Post date:** [February 27, 2024, 1:49pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/3 "2024-02-27T13:49:54Z")

</div>

[UPDATE] User error confirmed!

I went ahead and created another DRUM TRACK on a different TRACK.  
Set all parameters up to how I had them set on the previous track.

It started to trigger as desired. I then went and looked through all the setting of both tracks and noticed I had some effects on the previous TRACK. Though these effects were all switched OFF.

Why would EFFECTS that are switched OFF be effecting the ability to trigger polyphonically?

Interesting.

---

<div class="post-metadata">

**Author:** ![Thibault](https://squarp.community/user_avatar/squarp.community/thibault/32/1170_2.png) [@Thibault](https://squarp.community/u/Thibault)\
**Post date:** [February 27, 2024, 1:51pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/4 "2024-02-27T13:51:55Z")

</div>

That sounds like a bug.  
Which (disabled) effects were you using ?

---

<div class="post-metadata">

**Author:** ![owensands](https://squarp.community/letter_avatar_proxy/v4/letter/o/e95f7d/32.png) [@owensands](https://squarp.community/u/owensands)\
**Post date:** [February 27, 2024, 3:04pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/5 "2024-02-27T15:04:33Z")

</div>

I had same issue and it was a midi effect. I forgot which one it was. Just try them all till you find the culprit.

---

<div class="post-metadata">

**Author:** ![focalsounds](https://squarp.community/letter_avatar_proxy/v4/letter/f/ecae2f/32.png) [@focalsounds](https://squarp.community/u/focalsounds)\
**Post date:** [February 28, 2024, 11:58am UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/6 "2024-02-28T11:58:08Z")

</div>

Hi, it would have been an ECHO, LFO & something else that introduces repeats.  
Hope that helps.

---

<div class="post-metadata">

**Author:** ![Squirt](https://squarp.community/letter_avatar_proxy/v4/letter/s/58956e/32.png) [@Squirt](https://squarp.community/u/Squirt)\
**Post date:** [October 27, 2025, 6:55pm UTC](https://squarp.community/t/drum-lanes-not-triggering-polyphonically/10951/7 "2025-10-27T18:55:14Z")

</div>

I’ve got this exact issue. Been driving me mad working out if it’s was me. Will try without FC and report back.
